Welcome to ATV World
Europe's Largest Yamaha ATV Sports Dealer
Polaris Quad & Side By Side Dealer
The UK's Exclusive E-TON Quads Distributor
Cycle Country Accessories
3 point hitch
Three Point Hitch & Accessories
The Three Point Hitch is standard "catagory zero" and is designed for the larger 4WD ATV's. With the mounting hardware in place, the hitch can be attached or removed in minutes. The electromechanical screw-driven lift will give you years of clean, ecomonical operation.

Because the three point locks out the suspension of the ATV, it is able to penetrate the soil with control and precision. A built-in float was added to provide smooth operation of the implements in the ground.

Cycle Country has now designed universal three point mainframe that combines with model specific mount kit.

ATV 3 Point Hitch Main Frame - Universal

Cycle Country offers the most complete lineup of small tillage equipment available anywhere, and it all starts with the 3-Point Hitch Main Frame.

The 3-Point Hitch is a standard category zero hitch and is designed for the larger 4WD ATV's from the King Quad to the Traxter. With the mounting hardware in place, the hitch can be attached or removed in minutes. The electro-mechanical screw-driven lift will give you years of reliable operation.
mainframe
Because the 3-Point Hitch locks out the rear suspension of the ATV, it provides much better precision and control than light-weight pull-behind implements. Built-in float provides smooth operation of the implements in the ground.

Model Number: 71-0000


ATV 3 Point Hitch Mount Kits

Mounting kits are model specific and must be used in order to attach the Main Frame to your ATV. Please refer to the fitment chart for the correct mounting kit.
Model Number: 71-XXXX
mainframe
Mounting Kits: Arctic Cat Bombardier / Can-Am Honda John Deere Kawasaki Polaris Suzuki Yamaha

ATV 3 Point Tool Bar

mainframe
The Universal 3-Point Hitch Toolbar is used to link all implements (except the rear blade) with the 3-Point Hitch. Model Number: 70-0010

ATV 3 Point Cultivator

The Cultivator is best for shallow tillage in lighter soils or seed bed preparation for planting. The center tine can also be replaced with a crop shield when using the Cultivator to weed row crops. The Cultivator is attached to the Universal Toolbar in order to attach it to the 3-Point Hitch. It features seven spring tooth tines and adjustable depth wheels.
mainframe
Shovels: 7" (17.8 cm) with 1/2" (1.3 cm) overlap Maximum Tillage Width: 47" (119.4 cm) Maximum Depth: 5" (12.7 cm) Model Number: 70-0060

ATV Cultivator Row Crop Kit

Best for shallow tillage in lighter soils or seed bed preparation for planting. The center tine can also be replaced with a crop shield when using the cultivator to weed row crops.
mainframe
Max Tillage Width - 47” Max Tillage Depth - 5” 7 Shovels with 1/2” overlap Model Number: 70-0065

ATV 3 Point Furrower

The Furrower is used to make a planting furrow in a garden or field. It is bolted to the Universal Toolbar in order to attach it to the 3-Point Hitch.
mainframe
Maximum Furrowing Width: 7" (17.8 cm) Maximum Furrowing Depth: 6" (15.2 cm) Model Number: 70-0080

ATV 3 Point Disc Harrow

The Disc Harrow features eight disc blades and five adjustable angle positions. It is best for smoothing out ground and breaking up dirt clods, especially after plowing, to prepare a seedbed for planting. The Disc Harrow is attached to the Universal Toolbar in order to attach it to the 3-Point Hitch.
mainframe
Disc Blades: 14" (35.6 cm) Minimum Tillage Width: 40" (101.6 cm) Maximum Tillage Width: 46" (116.8 cm) Model Number: 70-0050

ATV 3 Point Moldboard Plow

The Moldboard Plow is a single bottom plow featuring an adjustable depth gauge wheel. It can be used for deep tillage or for breaking up sod. The Moldboard Plow is attached to the Universal Toolbar in order to attach it to the 3-Point Hitch.
mainframe
Beam Clearance: 14" (35.6 cm) Colter Wheel: 9" (22.9 cm) Maximum Tillage Width: 10" (25.4 cm) Model Number: 70-0040

ATV 3 Point Rake

The Rake is used to clear brush, sticks and leaves from food plots or garden areas. It is also excellent for clearing sandy beaches and for leveling dirt for landscaping projects. The Rake is attached to the Universal Toolbar in order to attach it to the 3-Point Hitch. The Rake features 39 spring steel tines.
mainframe
Width: 60" (152.4 cm) Height: 12" (30.5 cm) Tines: 3/4" (1.9 cm) wide. 2 Flotation Tires: 3.5" (8.9 cm) wide Model Number: 70-0090


ATV 3 Point 60" Rear Blade

The Rear Blade is used for scraping dirt, gravel or manure. It can be scraped forward or pushed backwards. It is excellent for landscaping projects. The Rear Blade is attached to the Rear Blade Hardware in order to attach it to the 3-Point Hitch. It does not require the Universal Toolbar.
mainframe
Blade Width: 60" (152.4 cm) Minimum Scrape Width: 44" (111.8 cm) Height: 12" (30.5 cm) Rear Blade Model Number: 70-0030

 

Cycle Country
For a FULL list of our Cycle Country products please feel free to request a brochure - Tel: 0113 2778663 Fax: 0113 270158
Call ATV World on 0113 2778663
National Delivery
Cycle Country Logo
Road Legal Quads at ATV World