TYRE INFLATION INSTRUCTIONS AND GUIDLINES:
Tyre and wheel assemblies can be explosive if inflated improperly!
PROPER TOOLS, SAFETY EQUIPMENT AND SAFETY PRECAUTIONS MUST BE MADE!
ONLY TRAINED PERSONNEL SHOULD ATTEMPT TO MOUNT TYRE AND WHEEL ASSEMBLIES!
 
  • always clean the wheel rim and lubricate the tyre beads and wheel rim with a soap solution or other approved lubricant
  • use an extension hose and in-line gauge with regulated air pressure
  • do not stand over the tyre while inflating. Use the safety glasses and safety cage or other approved injury-prevention device during the inflation process
  • never pry against the wheel rim to seat a tyre
  • tyre and wheel must be out of line of sight during inflation process
  • inflate tyre until you hear bead seats snap, or until you reach manufacturer's maximum inflation pressure, whichever comes first. Do not exceed 25 PSI to seat the tyre on two piece wheels. If beads are not properly seated, air pressure over 25 PSI can cause the assembly to explode with force sufficient to cause serious or fatal injuries. If still not seated at that pressure, release all air from the tyre, disassemble and re-lubricate as discussed above.
  • follow tyre manufacturer's inflation recommendations only after you are certain tyre beads are fully seated. Never exceed manufacturer's maximum recommended tyre pressure.