AXLES,
CARRIERS, NERF BARS |
|
|
RPM DOMINATOR AXLES |
MILLENIUM
REAR BRIDGE CARRIER |
|
|
| Dominator
Racing axles by Redline peformance machine are the strongest
and most durbable axles on thje market today. Utilising
a 7-stage manufaturng process, the Dominator is guaranteed
to be 4 times stronger than stock! made from Ultra High
Strength Alloy Steel, precision CNC machined to exacting
tolerances, heat treated for strength, then polished and
chromed to yield the highest quality axle. All axles are
adjustable for rear width. |
Millennium
carriers are the first ATV carriers to utilise tapered
roller bearings. Millenium tapered roller bearings are
8 times stronger than the competition and 15 times stronger
than stock, this carrier spins your axle on the strongest
bearings available. At 25% lighter than the competitors,
the Millenium reduces unsprung weight and increases suspension
action.
|
| AVAILABLE
FOR: |
AVAILABLE
FOR: |
| Honda
TRX 250R, Honda '86 ATC 250R, Honda TRX 250X/300EX, Honda
400EX, Suzuki LT 250, Suzuki LT 500, Yamaha Banshee, Yamaha
Blaster, Yamaha Warrior. |
Honda
ATC/TRX 250R, Suzuki LT 250, Yamaha Banshee (Standard or
Round Housing), Yamaha Blaster, or Honda 400EX. |
| |
|
| ANTI-FADE
LOCK NUT |
|
| Anti-Fade
Lock Nuts are CNC machined from 6061 billet aluminum.
The lock nut is designed not bonly to keep your axle tight,
but to help dissipate heat created by the rear brake caliper/rotor.
Lock nut also incorporates a steel sleeve insert to help
prevent unnatural wear. |
|
|
HONDA
TRX 400EX |
HONDA
TRX 250R |
| |
|
| AXLE
LOCK NUTS |
|
|
Designed
to replace the stock double jam nut system which is notorious
for coming loose.These axle nuts from DRI have proven
to be the best axle nut on the market today, with hundreds
of test hours on them without a single failure. Nuts are
CNC machined from stainless steel and bolt on in minutes.
|
| YAMAHA
- Blaster, Banshee, Raptor |
|
| |
|
| ALUMINUM
NERF BARS |
ALUMINUM
REAR GRAB BARS |
|
|
Aluminum
nerf bars are available in two basic designs
- STANDARD
- which attach to front of the frame and exsisting footpeg
- PRO
PEGS - which attach to front of the frame and
have footpeg incorporated into the nerf bar. A variety
of net colours are available.
|
Aluminum
rear grab bars offer lighter weight over stock steel units.
Most grab bars come equipped with rear numberplate mounts
and flag mount.
|
| AVAILABLE
FOR: |
AVAIABLE
FOR: All Models |
| Honda
250R, 250X/300EX, 400EX, Yamaha Banshee, Blaster, Warrior,
Suzuki LT 250 and LT500 |
|
.gif)
